Products Products




XLR & 1/4" D-Cut Inserts

Sort by Position: Low to High
48 Per Page
WP-IN-TRSFD TRS 1/4 Inch Female to Solder D-Cut - Locking - Infinite Cables
TRS 1/4 Inch Female to Solder D-Cut - Locking
This d-cut adapter consists of a locking TRS 1/4 inch female on one end and a Solder on the other end. It is typically used to snap into a standard d-cut opening and connect a solder cable coming from within the wall to a 1/4 inch male cable going to a source.
WP-IN-TRSFD
In stock
+ −
Price:
USD $1.50
WP-IN-XLRM XLR Male to Solder D-Cut - Infinite Cables
XLR Male to Solder D-Cut

This XLR male connector fits into a standard Neutrik D-cut opening. It has solder tabs on the back for the cable to be terminated to.

WP-IN-XLRM
In stock
+ −
Price:
USD $1.04
WP-IN-XLRM-BK XLR Male to Solder D-Cut - Black - Infinite Cables
XLR Male to Solder D-Cut - Black

This XLR male connector fits into a standard Neutrik D-cut opening. It has solder tabs on the back for the cable to be terminated to.

WP-IN-XLRM-BK
In stock
+ −
Price:
USD $1.04
WP-IN-XLRF-L XLR Female to Solder D-Cut - Locking - Infinite Cables
XLR Female to Solder D-Cut - Locking

This XLR locking female connector fits into a standard Neutrik D-cut opening. It has solder tabs on the back for the cable to be terminated to.

WP-IN-XLRF-L
In stock
+ −
Price:
USD $1.17
WP-IN-XLRMF XLR Male D-Cut to XLR Female - Nickel - Infinite Cables
XLR Male D-Cut to XLR Female - Nickel

This adapter consists of a XLR male on one end and a XLR female on the other. It will fit into a standard Neutrik D-cut opening.

WP-IN-XLRMF
In stock
+ −
Price:
USD $4.58
WP-IN-XLRFM XLR Female D-Cut to XLR Male - Nickel - Infinite Cables
XLR Female D-Cut to XLR Male - Nickel

This adapter consists of a XLR female on one end and a XLR male on the other. It will fit into a standard Neutrik D-cut opening.

WP-IN-XLRFM
In stock
+ −
Price:
USD $4.58
CV-SCREW-KIT 13mm Screws and Hex Nuts for Securing D-Cut Connectors to Patch Panels and Wall Plates - Infinite Cables
13mm Screws and Hex Nuts for Securing D-Cut Connectors to Patch Panels and Wall Plates

This kit consists of 2 hex nuts and 2 screws. It is used to secure D-Cut connectors to wall plates and panels.

CV-SCREW-KIT
In stock
+ −
Price:
USD $0.29