IP Video Intercom Door Station - Vandal-Resistant - 1.3MP - Wired PoE - Two-Way Communication - 2.5mm Lens - IR - IP66 - Black

In stock
USD $150.75

Add to wish list


This 1.3MP IP video door station is has a 44° vertical and 80° horizontal field of view. The door station features a vandal-resistant design (IK9 Impact Protection), easy installation, video intercom integration, supports access control functions and motion detection. Its maximum resolution is 1280 x720 with a frame rate of 30 fps. The doorbell is IP based with integrated PoE technology which makes for a quick and easy installation over a single CAT5e/CAT6 cable. The door station can be used outdoors with a IP66 rated.


  • 1.3MP Sensor, 1280 x 720 Resolution
  • Vertical 44°FOV, Horizontal 80°FOV
  • Up to 5M of PIR Detection Sensor
  • IP66 rated
  • Built-in Microphone & Speaker
  • DC12V & PoE
  • Auto-uploads pictures to FTP server / client software


Option 1: connection through NVR/DVR

Option 2: Standalone connection


Image Sensor 1/3" (1.3 MP) progressive scan, CMOS, color, day/night
Night Vision Up to 16ft
Angle Adjustment -50° to 50°
Focal Length 2.5 mm
Aperture Pinhole, f/3.47mm
FOV 2.5 mm, horizontal FOV 80°, vertical FOV 44°
Smart Features
Motion Detection Yes
File Uploading FTP
Email Notification Login Succeeded via Software or Web
Alarm Input Door Magnetic Alarm
Resolution Main Stream: 1280 x 720
Sub-Stream: 640 x 480
Video Compression Standard H.264
Video Frame Rate PAL: 25 fps, NTSC: 30 fps
Video Bit Rate Main Stream: 32 Kbps to 4096 Kbps
Sub-Stream: 32 Kbps to 2048 Kbps
Anti-Flicker Frequency 50Hz, 60Hz
Wide Dynamic Range Digital WDR, Auto-Switch, Day/On, Night/Off
Image Settings Color, Brightness, Contrast, Sharpness, Saturation, Video Standard, OSD Display
Audio Input Built-in Omni directional microphone
Audio Output Built-in loudspeaker
Audio Quality Noise suppression and echo cancellation
Audio Compression Standard / Rate G.711 U / 64 Kbps
Audio Streaming Two-Way, Full Duplex
Ethernet 10/100 Mbps Self-Adaptive Ethernet
Network Connection Mode DHCP, Static IP Address
Door-Unlocked Duration 1 sec to 255 sec
Light Supplement
Light Supplement Mode IR Supplement, IR Distance: 5 meters
Wavelength 940nm
Control Auto On/Off, Time On/Off
Processor High-performance embedded SOC processor
Operating System Embedded Linux Operating System
Operating Conditions -30°C to 50°C (-22°F to 122°F); humidity: 10% to 90%
Power Supply PoE (802.3af Class 3) 12V DC
Protection Level IP66, IK9
Material Wall Mounting Shield: Zinc Alloy
Front Panel: Zinc Alloy
Rear Panel: Aluminum Alloy
Wall Mounting Plate: Secc Steel
Dimensions ⌀ 6.4" x 2.9" x 2.1" (⌀ 161.9 x 74.1 x 53.2mm)
Weight 1.7 lbs (773 g)

Quick Start Guide
User Manual
Data Sheet
RJ45 pin out diagram

Latest firmware version V1.4.6_190814

Web Portal Remote Access
Register/login with your Guarding Vision account for access to all devices in your account remotely from the browser. Supports Internet Explorer 8+, Chrome 41.0 to 44, Firefox 30.0 to 51 and Safari 8.0 to 11

Guarding vision Android app
Supports Android 4.1 and up

Guarding vision iOS app
Supports iOS 8.0 or later. Compatible with iPhone, iPad and iPod touch

iVMS-4200 video management software for the DVRs, NVRs and IP cameras
Supports macOS version 10.12,10.13 and 10.14 (64-bit)

iVMS-4200 video management software for the DVRs, NVRs and IP cameras
Supports Microsoft Windows 7/Windows 8.1/Windows 10 (32-bit or 64-bit)/Windows XP SP3 (32-bit)/Windows 2008 R2/Windows Server 2012 (64-bit)

SADP Tool V3.1.0.8
Search, activate devices on the network and modify the basic network information

Connect the door station CA-2510F2-BK as a standalone doorbell

  1. Connect the door station to you network through PoE switch or 12V DC power supply and an Ethernet cable.
  2. Activate the device from the SADP tool. For first time activation, this device cannot be activated through an NVR, it has to be connected to your network directly.
  3. After creating a new password, login and open the configuration page, go to Video Intercom -> Device No. Settings, change the Device Type from the drop down menu to "Doorphone". save and reboot the device.
  4. Download the Guarding Vision app from Google play or App store.
  5. Login or create a new account.
  6. Click the plus icon on the top right to add a new device, then click "Manual Adding".
  7. In the "Adding Type" field choose "Guarding Vision Domain" and enter the device serial number then click the save icon on top right corner.
  8. In the next screen click add and then enter the verification code (case sensitive).

You can find the serial number and verification code on the label on back of the device.

PLEASE NOTE: this device might not ring on your phone if the battery saving or data saver options are turned on.

No posts found

Write a review