RM-550-15U Wall Mount Swing-Out Cabinet 15U x 18.5" Usable Depth, Fans - Black - Infinite Cables

Wall Mount Swing-Out Cabinet 15U x 18.5" Usable Depth, Fans - Black

RM-550-15U
In stock
+
Price:
 
USD $141.62
Add to wish list

This 15U wall mount swing-out cabinet comes with a lockable front door, lockable swing out back, removable/lockable side panels and two fans. The swing-out back door allows for easy access during installation. It is typically used for housing network and DVR equipment used in small offices and homes.

Physical Characteristics
Color Black - Powder Coated
Material SPCC Cold Rolled Steel
Material Thickness Rails:1.35mm, Others:1.0 mm
Front Door Removable Front Door, Opening Angle is Over 180 Degrees, Lockable
Swing Out Back Opening Angle is Over 90 Degrees, Lockable – Requires Two Keys To Open
Lockable Side Panels Yes
Removable Side Panels Yes
Adjustable Mounting Profile Installation Yes
Assembly Required No
Loading Capacity Maximum 110 lbs [50 kg]
Cable Entries Cable Entry on Top and Bottom Panels
Width 19 inches
Capacity 15U
Product Dimensions 30.3 H, 23.6 W, 21.6 D inches [77 H, 60 W, 55 D cm]
Mounting Rails 2 pairs of square hole rails
Adjustable depth 75mm, 85mm, 95mm 105mm, 115mm (Measured from the Glass to the Rail)
Usable Mounting Dimensions 15U Height x 19" Wide x 18.5" Deep
Cooling Fans 2 fans located on top panel

Voltage (per fan): 100-125 V
Frequency (per fan) 50/60 Hz
Current (per fan): .20A
RPM (per fan): 2000/2400
Noise (per fan): 36/40 dBA
M/Hr (per fan): 104/127
CFM (per fan): 61/75
Approvals
ANSI/EIA Yes
RS-310-D Yes
IEC60297-2 Yes
DIN41494 Yes
PART1 Yes
PART7 Yes
Environmental
RoHS Yes
Reach Yes
Packaging Information
Package Quantity 1 - Wall Mount Swing-Out Cabinet 15U (Assembled)
Mounting Hardware 10 Sets – M6 Screws and Cage Nuts
Product Weight 76 lbs


Spec Sheet (RM-550-15U_spec_sheet.pdf, 133 Kb) [Download]

Dimensions (RM-550_specification.pdf, 474 Kb) [Download]

Sort by:
5
Amazing rack at a fantastic price. Solid, very sturdy. The swing out in nice to have but does take a little extra planning when mounting wires.
I removed the 2 spring pins holding the hinges allowing me to mount the back piece and run the cables without the rest of...
0 0
Write a review

Customers Who Bought This Item Also Bought

XLR Male to Solder D-Cut
In stock
Price:
USD $0.96
Add to wish list
XLR Female to Solder D-Cut - Locking
In stock
Price:
USD $1.08
Add to wish list
Wall Plate, 1-Port Keystone - White
In stock
Price:
USD $0.62
Add to wish list