Rack Filler Panels

This rack filler panel is 1U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This rack filler panel is 2U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This rack filler panel is 3U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This rack filler panel is 1U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This rack filler panel is 5U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This rack filler panel is 1U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This vented rack filler panel is 1U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This vented rack filler panel is 2U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This vented rack filler panel is 3U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This vented rack filler panel is 4U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This rack filler panel is 5U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This vented rack filler panel is 6U in height and constructed of 1.5mm thick steel. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This rack filler panel is 1U in height. It clips directly into square hole rail cutouts and does not require cage nuts or screws to install. It is used to fill empty rack space to prevent air re-circulation and improve cooling.

This rack filler panel is 2U in height. It clips directly into square hole rail cutouts and does not require cage nuts or screws to install. It is used to fill empty rack space to prevent air re-circulation and improve cooling.