BIX Panels and Accessories

This bix block has space for 5 runs of 4 pair cable per side. It is used to terminate phone lines.

This bix block has six keystone jack openings. It is used to mount standard keystone jacks.

This bix block has space for 6 runs of 4 pair cable per side. It is used to terminate six 4 pair cables to six RJ45 female ports.

This bix block has space for 12 runs of 2 pair cable per side. It is used to terminate twelve 2 pair cables to twelve RJ11 female ports.

This BIX-198-BL is a blue adhesive label. It is primarily used to apply on to the BIX-199 bix ID strips.

This BIX-198-RD is a red adhesive label. It is primarily used to apply on to the BIX-199 bix ID strips.

This BIX-198-WH is a white adhesive label. It is primarily used to apply on to the BIX-199 bix ID strips.

This identifying strip holder snaps on to bix blocks mounts. It is primarily used with paper ID strip inserts.

This bix block mount holds up to two bix blocks. It is typically mounted to a wall.

This bix block mount holds up to four bix blocks. It is typically mounted to a wall.

This bix block mount holds up to ten bix blocks. It is typically mounted to a wall.

This bix block mount holds up to twelve bix blocks. It is typically mounted to a wall.

This bix test probe (BIX17A) is used for quick tesing of bix distrubution panels. Alligator clips quickly connect to a butt set and the other easliy mates with a bix block for individual pair testing.