This active optical DisplayPort cable is plenum rated and consists of a DisplayPort male connector on both ends. The cable has a built in signal booster chipset which supports DisplayPort 1.4 and provides a wide range of features in a compact, lightweight form-factor. These cables are fully HDCP 1.4 / 2.2 compliant and supports signals with data rates up to 32.4 Gbps (HBR3). It is typically used to connect a DisplayPort source such as a PC or laptop to a monitor and supports full 8K Ultra HD resolution at 60Hz (4:4:4) up to 100 meters.
NOTE: This active optical DP cable is
directional. Each end of the cable is marking “Source” and “Display” to
indicate the direction of the signal flow. Always test the cable to be
sure that the signal flow is correct and for device compatibility before permanently
installing in a wall or ceiling.
Extend DisplayPort Signals Over Optical Cable
These cables are plenum rated and constructed
from both copper and optical fiber. They feature a built-in booster chipset
ideal for maintaining 8K Ultra HD resolution and ensure a full 32.4Gbps
bandwidth with no signal loss over longer distances.
Optimum Performance and Easy Installation
These cables utilize AOC technology which make
them more flexible and thinner than traditional long-length DisplayPort cables,
making them easier to install. The transmission signal is transferred over
fiber optic cable which eliminates EMI/RFI interference, maintaining a high
level of performance even in high interference environments.
|Cable Specs||Fiber Optic 50/125um multimode / Copper|
|Shielding||75% Braid + 100% Aluminum-Mylar Foil|
|Jacket Fire Rating||CMP|
|Strain Relief||Molded PVC|
|Connector A||DisplayPort Male|
|Connector B||DisplayPort Male|
|Resolution||Ultra HD 8K @ 60Hz|
|Bandwidth||32.4Gbps, 8.1 Gbps per channel|
|HDCP Compliant||Yes, 1.4 / 2.2|
|0.70 lbs (0.32 kg)||1.05 lbs (0.47 kg)||2.65 lbs (1.20 kg)|