HDMI IP Extenders

This HDMI video extender allows you to extend your 3D or HD display up to 197ft (60 meters) away from your source device over a single CAT5e or CAT6 cable at a resolutions of 1080p/60Hz.

This video extender allows you to extend your 3D or HD display up to 394ft (120 meters) away from your source device over a single Cat5e or Cat6 cable at a resolution of 1080p/60Hz. Built-in IR extender function allows IR remote control of source devices from remote viewing location by sending IR commands received in the area of the display back to the source devices. The HDMI extender also works through an Ethernet switch to support multiple displays. Receivers can be purchased separately under part number VE-HDMI-007-R. Please note that a dedicated gigabit switch should be used for this application as it requires a lot of bandwidth.

This video receiver works with the VE-HDMI-007 to allow you to split a source to multiple displays through an Ethernet switch.

This HDBase-T HDMI extender allows you to extend your display up to 393ft (120m) away from your source device over Cat5e/6 cables. It supports an input resolution of 4K@60Hz, YUV 4:4:4, fully HDMI 2.0 compliant and an output resolution of 4K@60Hz, YUV 4:2:0. Ideal for digital signage in malls, restaurants or public spaces.

This video receiver works with the VE-HDMI-015 to allow you to split a source to multiple displays through an Ethernet switch.

This HDMI single Cat5e/6 wall plate video extender allows you to extend your HD display up to 190ft (60 meters) and keeps your cables hidden behind walls. Built-in IR extender function allows IR remote control of source devices from remote viewing location by sending IR commands received in the area of the display back to the source devices. Power is required at both the transmitter and receiver units.

This 4 port HDMI video extender allows you to extend a maximum of four 3D/HD displays up to 196ft (60 meters) away from your source device over Cat6 cables at a resolution of 1080p/60Hz.