This active optical High-Speed HDMI® cable is plenum rated and consists of a HDMI male connector on both ends. The cable has a built in signal booster chipset which allows it to maintain a HDMI 2.1 signal over a thin cable at longer lengths with no signal loss. It is typically used to connect a HDMI source such as Blu-Ray players and PC's to a HDTV or monitor and supports full 8K Ultra HD resolution and High Dynamic Range (HDR). The AOC cable also works with splitters, switches and other video sharing devices.
NOTE: This active optical HDMI® cable is directional. Each end of the cable is marking “Source” and “Display” to indicate the direction of the signal flow. Always test the cable to be sure that the signal flow is correct and for device compatibility before permanently installing in a wall or ceiling.
Extend HDMI Signals Over Optical Cable
These cables are plenum rated and constructedfrom both copper and optical fiber. They feature a built-in booster chipsetideal for maintaining 8K Ultra HD resolution and ensure a full 48Gpbs bandwidthwith no signal loss over longer distances.
Optimum Performance and Easy Installation
These cables utilize AOC technology which makethem more flexible and thinner than traditional long-length HDMI cables, makingthem easier to install. The transmission signal is transferred over fiber opticcable which eliminates EMI/RFI interference, maintaining a high level ofperformance even in high interference environments.
Digital Signage • LED signboards in streets and in stadiums • Medical Imaging Equipment • Airplane On-board Video System • Home Theater • Blue-ray, 3D video, Projector, Set-up box, DVR, Game Consoles and Computer • TV Broadcast Station • Conference Room Video Equipment • Security systems
|Cable Specs||Hybrid with OM3 Fiber / Copper|
|Shielding||75% Braid + 100% Aluminum-Mylar Foil|
|Jacket Fire Rating||Plenum Rated CMP|
|Strain Relief||Molded PVC|
|Differential Input||100 ohm|
|Power Consumption||250mW (Max)|
|Connector A||HDMI A (19 pin) Male|
|Connector B||HDMI A (19 pin) Male|
|Maximum Resolution||Ultra HD 8K (50/60Hz) up to 30m, 4K (50/60/100/120Hz), 1080p Deep Color, 1080i, 720p, 480p|
|Maximum Bandwidth||12 Gbps x 4 Channel|
|Video||HDR, Deep Color (48-bit) and 3D Compatible|
|O/E Converter||4 channel 850 nm VCSEL array (Transmitter)|
4 channel GaAs PD array (Receiver)
VBR (Variable Refresh Rate)
QMS (Quick Media Switching)
QFT (Quick Frame Transport)
ALLM (Auto Low Latency Mode)
DSC (Display Stream Compression)
|Built in Ethernet Channel||Yes|
|HDCP 2.2 Compliant||Yes|
|HDMI Version||HDMI 2.1, Backward Compatible with HDMI 2.0/1.4|
|0.36 lbs||0.52 lbs||0.69 lbs||0.93 lbs||1.37 lbs||2.25 lbs|