This adjustable cable jacket strip tool is designed for stripping and cutting a variety of UTP and STP networking and data cables. It is spring loaded for ease of use and is suitable for multi-conductor cable diameters from 3.5mm to 9.0mm.
This punch-down tool is used to terminate 90 degree 110 style jacks. It allows for faster and more accurate jack termination with one simple motion. It also features built-in blades which cut off excess wire after termination. The tool is designed with a durable steel body with an ergonomically friendly handle.
This punch-down tool is used to terminate 180 degree 110 style jacks. It allows for faster and more accurate jack termination with one simple motion. It also features built-in blades which cut off excess wire after termination. The tool is designed with a durable steel body with an ergonomically friendly handle.
This compact and inexpensive punch-down and jacket strip tool is used to terminate 110/88 style jacks and patch panels. It can also be used to strip the outside jacket of CAT3, CAT5e, CAT6, and CAT6A networking cable.
This impact punchdown tool is used to terminate 110 style jacks and patch panels. The tool also comes with a reversible blade, one side for seating only, the other side for seating and trimming.
This impact punchdown tool is used to terminate 5 pairs of 110 style terminal block. The tool also comes with reversible blades, one side for seating only, the other side for seating and trimming.
This punchdown jack palm holder is used to hold a punchdown jack in place when terminating jacks in your palm.
This modular plug crimp tool crimps a variety for modular plugs, as well as cuts and strips cable. It is a ratchet style crimp mechanism that reduces user fatigue.
This modular plug crimp tool crimps a variety of pass-through modular plugs, standard RJ11 and RJ12 plugs and also can be used to cut and strip cables as well. It has a ratchet style crimp mechanism that reduces user fatigue and ensures a quality crimp every time.
This compact crimp tool crimps RJ45 pass-through modular plugs and also can be used to cut and strip cables as well. It has a ratchet style crimp mechanism that reduces user fatigue and ensures a quality crimp every time.
This is a replacement blade for the TL-CR-RJ-PTS wire cutter. It is used to trim off the excess wires protruding from the pass through plugs.
This is a replacement blade for the TL-CR-RJ-PTS jacket stripper. It is used to trim off the excess wires protruding from the pass through plugs.
This RJ45 modular plug crimp tool crimps RJ45 shielded plugs which have an external strain relief. It is a two stage tool which first crimps down the contacts and can then be used to crimp the external strain relief. The ratchet mechanism makes crimping quick and easy and reduces user fatigue.
This RJ45 continuity tester tests for shorts, mis-wires and open circuits.
The tone generator and probe consists of two individual units, the tone generator and the probe sensing tip. It's used to trace and trouble shoot wires either individually or within a cable bundle.
CALL US @ 1-866-207-6442
FREE SHIPPING over $99
SHOP SECURELY
