Tools & Testers

This economical crimp tool crimps RJ45 modular plugs. The tool can also cut and strip flat 8 conductor cable. This tool With its economical price, sturdy design and spring loaded crimp mechanism, this tool is prefect for the DYI user who has a small job to complete or uses it sparingly.

TLH-120
In stock
+
Price:
USD $5.54
Add to wish list

This professional modular plug crimp tool crimps a variety for modular plugs which include RJ45, RJ12, RJ11, RJ9 and DEC. The tool can also cut and strip both flat phone cables and round networking cable. With its ergonomically designed handles and ratcheting crimp mechanism, this tool reduces user fatigue and delivers a precise crimp.

TLH-121
In stock
+
Price:
USD $17.04
Add to wish list

This professional modular plug crimp tool crimps pass-through modular plugs, both shielded and unshielded. The tool can also cut and strip round Ethernet cabling. With its ergonomically designed handles and spring loaded crimp mechanism, this tool reduces user fatigue and delivers a precise crimp.

TLH-125
In stock
+
Price:
USD $29.58
Add to wish list

This professional modular plug crimp tool crimps a variety for modular plugs which include RJ50, RJ45, RJ12, RJ11, RJ9 and DEC. The tool can also cut and strip both flat phone cables and round networking cable. With its ergonomically designed handles and ratcheting crimp mechanism, this tool reduces user fatigue and delivers a precise crimp.

TLH-130
In stock
+
Price:
USD $17.19
Add to wish list

This impact punchdown tool is used to terminate 110/88 style jacks and patch panels. The tool also comes with a reversible blade, one side for seating only, the other side for seating and trimming. Some additional features are a rear blade storage compartment and a high/low impact dial.

TLH-400
In stock
+
Price:
USD $7.19
Add to wish list

This impact punchdown tool is used to terminate 110/88 style jacks and patch panels. The tool also comes with a reversible blade, one side for seating only, the other side for seating and trimming. Some additional features are a rear blade storage compartment, a high/low impact dial, wire hook and mini flat head screw driver.

TLH-401
In stock
+
Price:
USD $16.54
Add to wish list

This professional impact punchdown tool is used to terminate 4 pairs of 110/88 style terminal block. The tool also comes with reversible blades, one side for seating only, the other side for seating and trimming. Ideal for terminating networking cables on patch panels. This tool saves the installer time and energy by reducing the amount of punch-downs required.

TLH-410
In stock
+
Price:
USD $32.69
Add to wish list

This compact and inexpensive jacket strip tool is used to strip UTP/STP cables. It easily strips the outside jacket of CAT3, CAT5e, CAT6, and CAT6A networking cable.

TLH-500
In stock
+
Price:
USD $0.54
Add to wish list

This all-in-one, adjustable cable jacket strip and cut tool is designed for stripping and cutting a variety of UTP/STP networking cables, flat telephone cables and coaxial cables. The pre-defined, 2-blade cartridge easily strips RG59/RG6/RG11/RG7 coax cable. The adjustable round cable cavity is ideals for stripping network cables such as CAT5e, CAT6 and CAT6A cables. The two blades in the handle of the tool are perfect for stripping flat phone cables. It is spring loaded for ease of use and is lightweight and compact.

TLH-510
In stock
+
Price:
USD $9.58
Add to wish list

This network cable tester tests the pin assignments accurately of unshielded and shielded RJ45 cables as well as telephone cables (RJ11 and RJ12) and BNC cables. It allows you to determine if the cable is pinned correctly or if it is mis-wired, shorted or has open circuits. The tester has two test modes, fast scroll and slow scroll. The tester is powered using a 9V battery (not included).

TLH-1000
In stock
+
Price:
USD $10.08
Add to wish list

This adjustable cable jacket strip tool is designed for stripping and cutting a variety of UTP and STP networking and data cables. It is spring loaded for ease of use and is suitable for multi-conductor cable diameters from 3.5mm to 9.0mm.

TL-ST-CAT
In stock
+
Price:
USD $13.23
Add to wish list

This punch-down tool is used to terminate 90 degree 110 style jacks. It allows for faster and more accurate jack termination with one simple motion. It also features built-in blades which cut off excess wire after termination. The tool is designed with a durable steel body with an ergonomically friendly handle.

TL-PUM-90
In stock
+
Price:
USD $75.88
Add to wish list

This die set is fits both the TL-PUM-180 and TL-PUM-90 handles. It can be used in terminating 90 degree 110 style jacks.

TL-PUM-90-DIESET
In stock
+
Price:
USD $21.69
Add to wish list

This punch-down tool is used to terminate 180 degree 110 style jacks. It allows for faster and more accurate jack termination with one simple motion. It also features built-in blades which cut off excess wire after termination. The tool is designed with a durable steel body with an ergonomically friendly handle.

TL-PUM-180
In stock
+
Price:
USD $75.88
Add to wish list

This die set is fits both the TL-PUM-180 and TL-PUM-90 handles. It can be used in terminating 180 degree 110 style jacks.

TL-PUM-180-DIESET
In stock
+
Price:
USD $21.69
Add to wish list

This compact and inexpensive punch-down and jacket strip tool is used to terminate 110/88 style jacks and patch panels. It can also be used to strip the outside jacket of CAT3, CAT5e, CAT6, and CAT6A networking cable.

TL-PU-E2
In stock
+
Price:
USD $3.31
Add to wish list

This punchdown jack palm holder is used to hold a punchdown jack in place when terminating jacks in your palm.

TL-PU-H
In stock
+
Price:
USD $1.19
Add to wish list

This modular plug crimp tool crimps a variety of pass-through modular plugs, standard RJ11 and RJ12 plugs and also can be used to cut and strip cables as well. It has a ratchet style crimp mechanism that reduces user fatigue and ensures a quality crimp every time.

TL-CR-RJ-PT
Price:
USD $69.38
Out of stockAdd to wish list

This is a replacement blade for the TL-CR-RJ-PT. It is used to trim off the excess wires protruding from the pass through plugs.

TL-CR-RJ-PT-BLADE
In stock
+
Price:
USD $1.65
Add to wish list

This compact crimp tool crimps RJ45 pass-through modular plugs and also can be used to cut and strip cables as well. It has a ratchet style crimp mechanism that reduces user fatigue and ensures a quality crimp every time.

TL-CR-RJ-PTS
Price:
USD $45.54
Out of stockAdd to wish list

This is a replacement blade for the TL-CR-RJ-PTS wire cutter. It is used to trim off the excess wires protruding from the pass through plugs.

TL-CR-RJ-PTS-B1
In stock
+
Price:
USD $2.92
Add to wish list

This is a replacement blade for the TL-CR-RJ-PTS jacket stripper. It is used to trim off the excess wires protruding from the pass through plugs.

TL-CR-RJ-PTS-B2
In stock
+
Price:
USD $2.50
Add to wish list

This RJ45 modular plug crimp tool crimps RJ45 shielded plugs which have an external strain relief. It is a two stage tool which first crimps down the contacts and can then be used to crimp the external strain relief. The ratchet mechanism makes crimping quick and easy and reduces user fatigue.

TL-CR-RJ-X
In stock
+
Price:
USD $75.88 USD $49.08
Add to wish list

This RJ45 continuity tester tests for shorts, mis-wires and open circuits.

TL-TE-RJ
Price:
USD $9.38
Out of stockAdd to wish list

The tone generator and probe consists of two individual units, the tone generator and the probe sensing tip. It's used to trace and trouble shoot wires either individually or within a cable bundle.

TL-TE-TP
Price:
USD $144.38
Out of stockAdd to wish list