Cable Hangers

These J-Hooks are convenient for running communications cable and can be used with beam clamps. They support up to 90 Cat5e cables with the center radius of the bundle spread over the 2 inch opening. Attach them easily to various supports, beam clamps and struts. They are also stackable - in parallel or perpendicular orientation for vertical support of multiple tiers of cable and maintain the integrity of high performance data cable.

CC-JH2P
In stock
+
Price:
USD $2.31
Add to wish list

These J-Hooks are convenient for running communications cable and can be used with beam clamps. They support up to 90 Cat5e cables with the center radius of the bundle spread over the 2 inch opening. Attach them easily to various supports, beam clamps and struts. They are also stackable - in parallel or perpendicular orientation for vertical support of multiple tiers of cable and maintain the integrity of high performance data cable.

CC-JH2M
In stock
+
Price:
USD $2.38
Add to wish list

These J-Hooks are convenient for running communications cable and can be used with threaded rods and beam clamps. They support up to 90 Cat5e cables with the center radius of the bundle spread over the 2 inch opening. Attach them easily to various supports, beam clamps and struts. They are also stackable - in parallel or perpendicular orientation for vertical support of multiple tiers of cable and maintain the integrity of high performance data cable.

CC-JH2M-R
Price:
USD $2.58
Out of stockAdd to wish list

This loop hanger provides sturdyand reliable support for a variety of networking cables such as CAT5e, CAT6,CAT6A and fiber optic cabling. It is flexible, can rotate to anydirection and holds a 2 inch diameter bundle cabling without damaging thecable. It is also made of plenum rated material so that it can be used inplenum spaces above ceilings and below floors.

*Beam Clamp, Screws, Rods and Nuts All Sold Separately

CC-LP200
In stock
+
Price:
USD $0.46
Add to wish list

This cable hanger provides sturdy and reliable support for LMR-400, LMR-500 and LMR-600 cables.

CN-BH-S38-NH
In stock
+
Price:
USD $4.12
Add to wish list

This loop hanger provides sturdy and reliable support for a variety of networking cables such as CAT5e, CAT6, CAT6A and fiber optic cabling. It is flexible, can rotate to any direction and holds a 2.5 inch diameter bundle cabling without damaging the cable. It is also made of plenum rated material so that it can be used in plenum spaces above ceilings and below floors.

*Beam Clamp, Screws, Rods and Nuts All Sold Separately

CC-LP250
In stock
+
Price:
USD $0.92
Add to wish list

This loop hanger provides sturdy and reliable support for a variety of networking cables such as CAT5e, CAT6, CAT6A and fiber optic cabling. It is flexible, can rotate to any direction and holds a 5 inch diameter bundle cabling without damaging the cable. It is also made of plenum rated material so that it can be used in plenum spaces above ceilings and below floors.

*Beam Clamp, Screws, Rods and Nuts All Sold Separately

CC-LP500
In stock
+
Price:
USD $3.88
Add to wish list

This steel plated beam clampprovides sturdy support for loop cable hangers on I-beams and steel supports.

*Screws, Rods and Nuts Sold Separately

CC-BC0250
In stock
+
Price:
USD $1.00
Add to wish list

These screws have a 1/4-20 threadand are 3/4 inches in length. They are compatible with our CC-BC0250 beamclamp and CC-HN01-075-25 nuts and are typically used to secure our loop cablehangers to our beam clamps in a parallel fashion. They are zinc platedand are sold in packs of 25.

*Nuts Sold Separately

CC-SC01-075-25
In stock
+
Price:
USD $2.23
Add to wish list

These screws have a 1/4-20 threadand are 1.25 inches in length. They are compatible with our CC-BC0250beam clamp and CC-HN01-075-25 nuts and are typically used to secure our loopcable hangers to our beam clamps in a perpendicular fashion. They arezinc plated and are sold in packs of 25.

*Nuts Sold Separately

CC-SC01-125-25
In stock
+
Price:
USD $3.38
Add to wish list

These hex nuts are zinc plated andhave a 1/4-20 thread. They are used along with 1/4-20 screws and rods(part numbers CC-SC01-075-25, CC-SC01-125-25 and CC-TR01-18).
CC-HN01-075-25
In stock
+
Price:
USD $0.65
Add to wish list

This zinc plated threaded rod has a 1/4-20 thread and is 18 inch in length. It is compatible with our CC-BC0250 beam clamp and CC-HN01-075-25 nuts and is typically used to secure multiple loop cable hangers to our beam clamps in a perpendicular or parallel fashion.

*Nuts sold Separately

CC-TR01-18
In stock
+
Price:
USD $5.38
Add to wish list