Description:
The IC-485IP is a bi-directional interface converters for RS232 and RS-485. The converter can function as a short haul modem or interface converter. The converter can be connected by either two pair, 4 conductor or RJ11 telephone cable. The use of a power supply is optional and included.

Connector:
RS-232                   DB9 Male
RS-485/422            4-screw Terminal Block

RS-232:
ESD Protection      15KV
Signal Isolation       None
Power Isolation       None
Pin Configuration    1 - DCD
                               2 - RX
                               3 - TX
                               4 - DTR
                               5 - GND
                               6 - DSR
                               7 - RTS
                               8 - CTS
                               9 – RI

RS-485 / RS-422:
Surge Protection    Yes
Signal Isolation      None 
Power Isolation      None
Topology                Switch Select
Terminator             Auto
Pin Configuration   RS-485: Data+, Data-
                              RS-422: Rx+, Rx-, Tx+, Tx-

Cable Length:
1,200m [4,000'] (max.)

Data Rate:
Up to 100Kbps Under 1,200m [4,000']

Baud Rate:
Auto Detection

LED:
Red                      Rx Transmission
Green                   Tx Transmission

Power:
Range                  DC 5V
Consumption       < 0.5W
Protection            Wrong Polarity Input Protection

Casing:
Plastic case

Dimension (W x D x H):
55 x 40 x 25mm

Operating Temperature:
0 to 60ºC, 5~95% RH

Storage Temperature:
0 to 70ºC, 5~95% RH

Approvals:
CE, FCC